#pragma once

#include <cassert>
#include <memory>
#include <session/config.hpp>
#include <session/util.hpp>
#include <stdexcept>
#include <type_traits>
#include <unordered_set>
#include <variant>
#include <vector>

#include "../logging.hpp"
#include "../sodium_array.hpp"
#include "base.h"
#include "namespaces.hpp"

namespace oxenc {
class bt_dict_producer;
class bt_dict_consumer;
}  // namespace oxenc

namespace session::config {

template <typename T, typename... U>
static constexpr bool is_one_of = (std::is_same_v<T, U> || ...);

/// True for a dict_value direct subtype, but not scalar sub-subtypes.
template <typename T>
static constexpr bool is_dict_subtype = is_one_of<T, config::scalar, config::set, config::dict>;

/// True for a dict_value or any of the types containable within a dict value
template <typename T>
static constexpr bool is_dict_value =
        is_dict_subtype<T> || is_one_of<T, dict_value, int64_t, std::string>;

/// Our current config state
enum class ConfigState : int {
    /// Clean means the config is confirmed stored on the server and we haven't changed anything.
    Clean = 0,

    /// Dirty means we have local changes, and the changes haven't been serialized yet for sending
    /// to the server.
    Dirty = 1,

    /// Waiting is halfway in-between clean and dirty: the caller has serialized the data, but
    /// hasn't yet reported back that the data has been stored, *and* we haven't made any changes
    /// since the data was serialize.
    Waiting = 2,
};

using Ed25519PubKey = std::array<unsigned char, 32>;
using Ed25519Secret = sodium_array<unsigned char>;

// Helper base class for holding a config signing keypair
class ConfigSig {
  protected:
    // Contains an optional signing keypair; if the public key is set then incoming messages must
    // contain a valid signature from that key to be loaded.  If the private key is set then a
    // signature will be added to the message signed by that key.  (Note that if a public key is set
    // but not a private key then this config object cannot push config changes!)
    std::optional<Ed25519PubKey> _sign_pk = std::nullopt;
    Ed25519Secret _sign_sk;

    ConfigSig() = default;

    // Returns a blake2b 32-byte hash of the config signing seed using hash key `key`.  `key` must
    // be 64 bytes or less, and should generally be unique for each key use case.
    //
    // Throws if a secret key hasn't been set via `set_sig_keys`.
    std::array<unsigned char, 32> seed_hash(std::string_view key) const;

    virtual void set_verifier(ConfigMessage::verify_callable v) = 0;
    virtual void set_signer(ConfigMessage::sign_callable v) = 0;

    // Meant to be called from the subclass constructor after other necessary initialization; calls
    // set_sig_keys, set_sig_pubkey, or clear_sig_keys() for you, based on which are non-nullopt.
    //
    // Throws if given invalid data (i.e. wrong key size, or mismatched pubkey/secretkey).
    void init_sig_keys(
            std::optional<std::span<const unsigned char>> ed25519_pubkey,
            std::optional<std::span<const unsigned char>> ed25519_secretkey);

  public:
    virtual ~ConfigSig() = default;

    /// API: base/ConfigSig::set_sig_keys
    ///
    /// Sets an Ed25519 keypair pair for signing and verifying config messages.  When set, this adds
    /// an additional signature for verification into the config message (*after* decryption) that
    /// validates a config message.
    ///
    /// This is used in config contexts where the encryption/decryption keys are insufficient for
    /// permission verification to produce new messages, such as in groups where non-admins need to
    /// be able to decrypt group data, but are not permitted to push new group data.  In such a case
    /// only the admins have the secret key with which messages can be signed; regular users can
    /// only read, but cannot write, config messages.
    ///
    /// When a signature public key (with or without a secret key) is set the config object enters
    /// a "signing-required" mode, which has some implications worth noting:
    /// - incoming messages must contain a signature that verifies with the public key; messages
    ///   without such a signature will be dropped as invalid.
    /// - because of the above, a config object cannot push config updates without the secret key:
    ///   thus any attempt to modify the config message with a pubkey-only config object will raise
    ///   an exception.
    ///
    /// Inputs:
    /// - `secret` -- the 64-byte sodium-style Ed25519 "secret key" (actually the seed+pubkey
    ///   concatenated together) that sets both the secret key and public key.
    void set_sig_keys(std::span<const unsigned char> secret);

    /// API: base/ConfigSig::set_sig_pubkey
    ///
    /// Sets a Ed25519 signing pubkey which incoming messages must be signed by to be acceptable.
    /// This is intended for use when the secret key is not known (see `set_sig_keys()` to set both
    /// secret and pubkey keys together).
    ///
    /// Inputs:
    /// - `pubkey` -- the 32 byte Ed25519 pubkey that must have signed incoming messages
    void set_sig_pubkey(std::span<const unsigned char> pubkey);

    /// API: base/ConfigSig::get_sig_pubkey
    ///
    /// Returns a const reference to the 32-byte Ed25519 signing pubkey, if set.
    ///
    /// Inputs: none.
    ///
    /// Outputs:
    /// - reference to the 32-byte pubkey, or `std::nullopt` if not set.
    const std::optional<std::array<unsigned char, 32>>& get_sig_pubkey() const { return _sign_pk; }

    /// API: base/ConfigSig::clear_sig_keys
    ///
    /// Drops the signature pubkey and/or secret key, if the object has them.
    ///
    /// Inputs: none.
    void clear_sig_keys();
};

/// Base config type for client-side configs containing common functionality needed by all config
/// sub-types.
class ConfigBase : public ConfigSig {
  private:
    // The object (either base config message or MutableConfigMessage) that stores the current
    // config message.  Subclasses do not directly access this: instead they call `dirty()` if they
    // intend to make changes, or the `set_config_field` wrapper.
    std::unique_ptr<ConfigMessage> _config;

    // Tracks our current state
    ConfigState _state = ConfigState::Clean;

    static constexpr size_t KEY_SIZE = 32;

    // Contains the base key(s) we use to encrypt/decrypt messages.  If non-empty, the .front()
    // element will be used when encrypting a new message to push.  When decrypting, we attempt each
    // of them, starting with .front(), until decryption succeeds.
    using Key = std::array<unsigned char, KEY_SIZE>;
    sodium_vector<Key> _keys;

    // Contains the current active message hash, as fed into us in `confirm_pushed()`.  Empty if we
    // don't know it yet.  When we dirty the config this value gets moved into `old_hashes_` to be
    // removed by the next push.
    std::string _curr_hash;

    // Contains obsolete known message hashes that are obsoleted by the most recent merge or push;
    // these are returned (and cleared) when `push` or `old_hashes` are called.
    std::unordered_set<std::string> _old_hashes;

  protected:
    // Constructs a base config by loading the data from a dump as produced by `dump()`.  If the
    // dump is nullopt then an empty base config is constructed with no config settings and seqno
    // set to 0.
    //
    // Can optionally be passed a pubkey or secretkey (or both, but the pubkey can be obtained from
    // the secretkey automatically): if either is given, the config object is set up to require
    // verification of incoming messages using the associated pubkey, and will be signed using the
    // secretkey (if a secret key is given).
    explicit ConfigBase(
            std::optional<std::span<const unsigned char>> dump = std::nullopt,
            std::optional<std::span<const unsigned char>> ed25519_pubkey = std::nullopt,
            std::optional<std::span<const unsigned char>> ed25519_secretkey = std::nullopt);

    // Initializes the base config object with dump data and keys; this is typically invoked by the
    // constructor, but is exposed to subclasses so that they can delay initial processing by
    // default-constructing the base class and then calling this from their own constructor.  This
    // two-step call pattern is *required* when using extra data in particular [because the virtual
    // load_extra_data call and any derived class fields are not available before derived class
    // construction].
    //
    // This method must not be called outside derived class construction!
    void init(
            std::optional<std::span<const unsigned char>> dump = std::nullopt,
            std::optional<std::span<const unsigned char>> ed25519_pubkey = std::nullopt,
            std::optional<std::span<const unsigned char>> ed25519_secretkey = std::nullopt);

    // Tracks whether we need to dump again; most mutating methods should set this to true (unless
    // calling set_state, which sets to to true implicitly).
    bool _needs_dump = false;

    // Sets the current state; this also sets _needs_dump to true.  If transitioning to a dirty
    // state and we know our current message hash, that hash gets added to `old_hashes_` to be
    // deleted at the next push.
    void set_state(ConfigState s);

    // Returns a reference to the current MutableConfigMessage.  If the current message is not
    // already dirty (i.e. Clean or Waiting) then calling this increments the seqno counter.
    MutableConfigMessage& dirty();

    void set_verifier(ConfigMessage::verify_callable v) override;
    void set_signer(ConfigMessage::sign_callable s) override;

    // Virtual method to be overloaded by derived classes. Protobuf wrapped messages are used
    // for legacy types, so we need different logic depending on the class in question. All new
    // types will reject the protobuf and directly handle the binary data. Old types will try
    // protobuf parsing on incoming messages and handle all outgoing messages directly in binary
    virtual bool accepts_protobuf() const { return false; }

  public:
    // class for proxying subfield access; this class should never be stored but only used
    // ephemerally (most of its methods are rvalue-qualified).  This lets constructs such as
    // foo["abc"]["def"]["ghi"] = 12;
    // work, auto-vivifying (or trampling, if not a dict) subdicts to reach the target.  It also
    // allows non-vivifying value retrieval via .string(), .integer(), etc. methods.
    class DictFieldProxy {
      private:
        ConfigBase& _conf;
        std::vector<std::string> _inter_keys;
        std::string _last_key;

        /// API: base/ConfigBase::DictFieldProxy::get_clean_pair
        ///
        /// See if we can find the key without needing to create anything, so that we can attempt to
        /// access values without mutating anything (which allows, among other things, for assigning
        /// of the existing value to not dirty anything).  Returns nullptrs if the value or
        /// something along its path would need to be created, or has the wrong type; otherwise a
        /// const pointer to the key and the value.  The templated type, if provided, can be one of
        /// the types a dict_value can hold to also check that the returned value has a particular
        /// type; if omitted you get back the dict_value pointer itself.  If the field exists but is
        /// not the requested `T` type, you get back the key string pointer with a nullptr value.
        ///
        /// Inputs: None
        ///
        /// Outputs:
        /// - `const std::string*` -- Key
        /// - `const T*` -- Value
        template <typename T = dict_value, typename = std::enable_if_t<is_dict_value<T>>>
        std::pair<const std::string*, const T*> get_clean_pair() const {
            const config::dict* data = &_conf._config->data();
            // All but the last need to be dicts:
            for (const auto& key : _inter_keys) {
                auto it = data->find(key);
                data = it != data->end() ? std::get_if<config::dict>(&it->second) : nullptr;
                if (!data)
                    return {nullptr, nullptr};
            }

            const std::string* key;
            const dict_value* val;
            // The last can be any value type:
            if (auto it = data->find(_last_key); it != data->end()) {
                key = &it->first;
                val = &it->second;
            } else
                return {nullptr, nullptr};

            if constexpr (std::is_same_v<T, dict_value>)
                return {key, val};
            else if constexpr (is_dict_subtype<T>) {
                return {key, std::get_if<T>(val)};
            } else {  // int64 or std::string, i.e. the config::scalar sub-types.
                if (auto* scalar = std::get_if<config::scalar>(val))
                    return {key, std::get_if<T>(scalar)};
                return {key, nullptr};
            }
        }

        /// API: base/ConfigBase::DictFieldProxy::get_clean
        ///
        /// Same as above `get_clean_pair()` but just gives back the value, not the key
        ///
        /// Inputs: None
        ///
        /// Outputs:
        /// - `const T*` -- Value
        template <typename T = dict_value, typename = std::enable_if_t<is_dict_value<T>>>
        const T* get_clean() const {
            return get_clean_pair<T>().second;
        }

        /// API: base/ConfigBase::DictFieldProxy::get_dirty
        ///
        /// Returns a lvalue reference to the value, stomping its way through the dict as it goes to
        /// create subdicts as needed to reach the target value.  If given a template type then we
        /// also cast the final dict_value variant into the given type (and replace if with a
        /// default-constructed value if it has the wrong type) then return a reference to that.
        ///
        /// Inputs: None
        ///
        /// Outputs:
        /// - `T&` -- Value
        template <typename T = dict_value, typename = std::enable_if_t<is_dict_value<T>>>
        T& get_dirty() {
            config::dict* data = &_conf.dirty().data();
            for (const auto& key : _inter_keys) {
                auto& val = (*data)[key];
                data = std::get_if<config::dict>(&val);
                if (!data)
                    data = &val.emplace<config::dict>();
            }
            auto& val = (*data)[_last_key];

            if constexpr (std::is_same_v<T, dict_value>)
                return val;
            else if constexpr (is_dict_subtype<T>) {
                if (auto* v = std::get_if<T>(&val))
                    return *v;
                return val.emplace<T>();
            } else {  // int64 or std::string, i.e. the config::scalar sub-types.
                if (auto* scalar = std::get_if<config::scalar>(&val)) {
                    if (auto* v = std::get_if<T>(scalar))
                        return *v;
                    return scalar->emplace<T>();
                }
                return val.emplace<scalar>().emplace<T>();
            }
        }

        /// API: base/ConfigBase::DictFieldProxy::assign_if_changed
        ///
        /// Takes a value and assigns it to the dict only if that value is different.
        /// Will avoid dirtying the config if the assignement isn't changing anything
        ///
        /// Inputs:
        /// - `value` -- This will be assigned to the dict if it has changed
        template <typename T>
        void assign_if_changed(T value) {
            if constexpr (is_one_of<T, config::set, config::dict>) {
                // If we're assigning an empty set or dict then that's really the same as deleting
                // the element, since empty sets/dicts get pruned.  If we *don't* do this, then
                // assigning an empty value will dirty even though, ultimately, we aren't changing
                // anything.
                if (value.empty()) {
                    erase();
                    return;
                }
            }
            // Try to avoiding dirtying the config if this assignment isn't changing anything
            if (!_conf.is_dirty())
                if (auto current = get_clean<T>(); current && *current == value)
                    return;

            get_dirty<T>() = std::move(value);
        }

        /// API: base/ConfigBase::DictFieldProxy::insert_if_missing
        ///
        /// Takes a value and assigns it to the dict if it does not exist
        ///
        /// Inputs:
        /// - `value` -- This will be assigned to the dict if it is missing
        void insert_if_missing(config::scalar&& value) {
            if (!_conf.is_dirty())
                if (auto current = get_clean<config::set>(); current && current->count(value))
                    return;

            get_dirty<config::set>().insert(std::move(value));
        }

        /// API: base/ConfigBase::DictFieldProxy::set_erase_impl
        ///
        /// Erases from the dict
        ///
        /// Inputs:
        /// - `value` -- This will be deleted from the dict
        void set_erase_impl(const config::scalar& value) {
            if (!_conf.is_dirty())
                if (auto current = get_clean<config::set>(); current && !current->count(value))
                    return;

            config::dict* data = &_conf.dirty().data();

            for (const auto& key : _inter_keys) {
                auto it = data->find(key);
                data = it != data->end() ? std::get_if<config::dict>(&it->second) : nullptr;
                if (!data)
                    return;
            }

            auto it = data->find(_last_key);
            if (it == data->end())
                return;
            auto& val = it->second;
            if (auto* current = std::get_if<config::set>(&val))
                current->erase(value);
            else
                val.emplace<config::set>();
        }

      public:
        DictFieldProxy(ConfigBase& b, std::string key) : _conf{b}, _last_key{std::move(key)} {}

        /// API: base/ConfigBase::DictFieldProxy::operator[]&
        ///
        /// Descends into a dict, returning a copied proxy object for the path to the requested
        /// field.  Nothing is created by doing this unless you actually assign to a value.
        ///
        /// Inputs:
        /// - `subkey` -- searches through the dict this requested field
        ///
        /// Outputs:
        /// - `DictFieldProxy` -- Returns a copied proxy object
        DictFieldProxy operator[](std::string subkey) const& {
            DictFieldProxy subfield{_conf, std::move(subkey)};
            subfield._inter_keys.reserve(_inter_keys.size() + 1);
            subfield._inter_keys.insert(
                    subfield._inter_keys.end(), _inter_keys.begin(), _inter_keys.end());
            subfield._inter_keys.push_back(_last_key);
            return subfield;
        }

        /// API: base/ConfigBase::DictFieldProxy::operator[]&&
        ///
        /// Same as above `operator[]&`, but when called on an rvalue reference we just mutate the
        /// current proxy to the new dict path.
        ///
        /// Inputs:
        /// - `subkey` -- searches through the dict this requested field
        ///
        /// Outputs:
        /// - `DictFieldProxy&&` -- Mutate the current proxy to the new dict path
        DictFieldProxy&& operator[](std::string subkey) && {
            _inter_keys.push_back(std::move(_last_key));
            _last_key = std::move(subkey);
            return std::move(*this);
        }

        /// API: base/ConfigBase::DictFieldProxy::key
        ///
        /// Returns a pointer to the (deepest level) key for this dict pair *if* a pair exists at
        /// the given location, nullptr otherwise.  This allows a caller to get a reference to the
        /// actual key, rather than an ephemeral copy of the current key value.
        ///
        /// Inputs: None
        ///
        /// Outputs:
        /// - `std::string*` -- Returns a pointer to the key if the pair exists
        const std::string* key() const { return get_clean_pair().first; }

        /// API: base/ConfigBase::DictFieldProxy::string
        ///
        /// Returns a const pointer to the string if one exists at the given location, nullptr
        /// otherwise.
        ///
        /// Inputs: None
        ///
        /// Outputs:
        /// - `std::string*` -- Returns a pointer to the string if one exists
        const std::string* string() const { return get_clean<std::string>(); }

        /// API: base/ConfigBase::DictFieldProxy::uview
        ///
        /// Returns the value as a std::span<const unsigned char>, if it exists and is a string;
        /// nullopt otherwise.
        ///
        /// Inputs: None
        ///
        /// Outputs:
        /// - `std::optional<std::span<const unsigned char>>` -- Returns a value as a view if it
        /// exists
        std::optional<std::span<const unsigned char>> uview() const {
            if (auto* s = get_clean<std::string>())
                return std::span<const unsigned char>{
                        reinterpret_cast<const unsigned char*>(s->data()), s->size()};
            return std::nullopt;
        }

        /// API: base/ConfigBase::DictFieldProxy::string_view_or
        ///
        /// returns the value as a string_view or a fallback if the value doesn't exist (or isn't a
        /// string).  The returned view is directly into the value (or fallback) and so mustn't be
        /// used beyond the validity of either.
        ///
        /// Inputs:
        /// - `fallback` -- this value will be returned if it the requested value doesn't exist
        ///
        /// Outputs:
        /// - `std::string_view` -- Returned string view
        std::string_view string_view_or(std::string_view fallback) const {
            if (auto* s = string())
                return {*s};
            return fallback;
        }

        /// API: base/ConfigBase::DictFieldProxy::string_or
        ///
        /// Returns a copy of the value as a string, if it exists and is a string; returns
        /// `fallback` otherwise.
        ///
        /// Inputs:
        /// - `fallback` -- this value will be returned if it the requested value doesn't exist
        ///
        /// Outputs:
        /// - `std::string` -- Returned string
        std::string string_or(std::string fallback) const {
            if (auto* s = string())
                return *s;
            return fallback;
        }

        /// API: base/ConfigBase::DictFieldProxy::integer
        ///
        /// Returns a const pointer to the integer if one exists at the given location, nullptr
        /// otherwise.
        ///
        /// Inputs: None
        ///
        /// Outputs:
        /// - `int64_t*` -- Pointer to the integer if one exists
        const int64_t* integer() const { return get_clean<int64_t>(); }

        /// API: base/ConfigBase::DictFieldProxy::integer_or
        ///
        /// Returns the value as an integer or a fallback if the value doesn't exist (or isn't an
        /// integer).
        ///
        /// Inputs:
        /// - `fallback` -- this value will be returned if it the requested value doesn't exist
        ///
        /// Outputs:
        /// - `int64_t` -- Returned Integer
        int64_t integer_or(int64_t fallback) const {
            if (auto* i = integer())
                return *i;
            return fallback;
        }

        /// API: base/ConfigBase::DictFieldProxy::set
        ///
        /// Returns a const pointer to the set if one exists at the given location, nullptr
        /// otherwise.
        ///
        /// Inputs: None
        ///
        /// Outputs:
        /// - `config::set*` -- Returned pointer to the set if one exists
        const config::set* set() const { return get_clean<config::set>(); }

        /// API: base/ConfigBase::DictFieldProxy::dict
        ///
        /// Returns a const pointer to the dict if one exists at the given location, nullptr
        /// otherwise.  (You typically don't need to use this but can rather just use [] to descend
        /// into the dict).
        ///
        /// Inputs: None
        ///
        /// Outputs:
        /// - `config::dict*` -- Returned pointer to the dict if one exists
        const config::dict* dict() const { return get_clean<config::dict>(); }

        /// API: base/ConfigBase::DictFieldProxy::operator=(std::string&&)
        ///
        /// Replaces the current value with the given string.  This also auto-vivifies any
        /// intermediate dicts needed to reach the given key, including replacing non-dict values if
        /// they currently exist along the path.
        ///
        /// Inputs:
        /// - `value` -- replaces current value with given string
        void operator=(std::string&& value) { assign_if_changed(std::move(value)); }

        /// API: base/ConfigBase::DictFieldProxy::operator=(std::string_view)
        ///
        /// Replaces the current value with the given string_view.  This also auto-vivifies any
        /// intermediate dicts needed to reach the given key, including replacing non-dict values if
        /// they currently exist along the path (this makes a copy).
        ///
        /// Inputs:
        /// - `value` -- replaces current value with given string view
        void operator=(std::string_view value) { *this = std::string{value}; }

        /// API: base/ConfigBase::DictFieldProxy::operator=(std::span<const unsigned char>)
        ///
        /// Replaces the current value with the given std::span<const unsigned char>.  This also
        /// auto-vivifies any intermediate dicts needed to reach the given key, including replacing
        /// non-dict values if they currently exist along the path (this makes a copy).
        ///
        /// Inputs:
        /// - `value` -- replaces current value with given std::span<const unsigned char>
        ///
        /// Same as above, but takes a std::span<const unsigned char>
        void operator=(std::span<const unsigned char> value) {
            *this = std::string{reinterpret_cast<const char*>(value.data()), value.size()};
        }

        /// API: base/ConfigBase::DictFieldProxy::operator=(int64_t)
        ///
        /// Replaces the current value with the given integer.  This also auto-vivifies any
        /// intermediate dicts needed to reach the given key, including replacing non-dict values if
        /// they currently exist along the path.
        ///
        /// Inputs:
        /// - `value` -- replaces current value with given integer
        void operator=(int64_t value) { assign_if_changed(value); }

        /// API: base/ConfigBase::DictFieldProxy::operator=(config::set)
        ///
        /// Replaces the current value with the given set.  This also auto-vivifies any
        /// intermediate dicts needed to reach the given key, including replacing non-dict values if
        /// they currently exist along the path.
        ///
        /// Inputs:
        /// - `value` -- replaces current value with given set
        void operator=(config::set value) { assign_if_changed(std::move(value)); }

        /// API: base/ConfigBase::DictFieldProxy::operator=(config::set)
        ///
        /// Replaces the current value with the given dict. This often isn't needed because of how
        /// other assignment operations work This also auto-vivifies any intermediate dicts needed
        /// to reach the given key, including replacing non-dict values if they currently exist
        /// along the path.
        ///
        /// Inputs:
        /// - `value` -- replaces current value with given dict
        void operator=(config::dict value) { assign_if_changed(std::move(value)); }

        /// API: base/ConfigBase::DictFieldProxy::exists
        ///
        /// Returns true if there is a value at the current key.  If a template type T is given, it
        /// only returns true if that value also is a `T`.
        ///
        /// Inputs: None
        ///
        /// Outputs:
        /// - `bool` -- True if there is a value at the current key
        template <typename T = dict_value, typename = std::enable_if_t<is_dict_value<T>>>
        bool exists() const {
            return get_clean<T>() != nullptr;
        }

        /// API: base/ConfigBase::DictFieldProxy::exists
        ///
        /// Alias for `exists<T>()`
        ///
        /// Inputs: None
        ///
        /// Outputs:
        /// - `bool` -- True if there is a value at the current key
        template <typename T>
        bool is() const {
            return exists<T>();
        }

        /// API: base/ConfigBase::DictFieldProxy::erase
        ///
        /// Removes the value at the current location, regardless of what it currently is.  This
        /// does nothing if the current location does not have a value.
        ///
        /// Inputs: None
        void erase() {
            if (!_conf.is_dirty() && !get_clean())
                return;

            config::dict* data = &_conf.dirty().data();
            for (const auto& key : _inter_keys) {
                auto it = data->find(key);
                data = it != data->end() ? std::get_if<config::dict>(&it->second) : nullptr;
                if (!data)
                    return;
            }
            data->erase(_last_key);
        }

        /// API: base/ConfigBase::DictFieldProxy::set_insert(std::string)
        ///
        /// Adds a value to the set at the current location.  If the current value is not a set or
        /// does not exist then dicts will be created to reach it and a new set will be created.
        ///
        /// Inputs:
        /// - `value` -- The value to be set
        void set_insert(std::string_view value) {
            insert_if_missing(config::scalar{std::string{value}});
        }

        /// API: base/ConfigBase::DictFieldProxy::set_insert(int64_t)
        ///
        /// Adds a value to the set at the current location.  If the current value is not a set or
        /// does not exist then dicts will be created to reach it and a new set will be created.
        ///
        /// Inputs:
        /// - `value` -- The value to be set
        void set_insert(int64_t value) { insert_if_missing(config::scalar{value}); }

        /// API: base/ConfigBase::DictFieldProxy::set_erase(std::string_view)
        ///
        /// Removes a value from the set at the current location.  If the current value does not
        /// exist then nothing happens.  If it does exist, but is not a set, it will be replaced
        /// with an empty set.  Otherwise the given value will be removed from the set, if present.
        ///
        /// Inputs:
        /// - `value` -- The value to be set
        void set_erase(std::string_view value) {
            set_erase_impl(config::scalar{std::string{value}});
        }

        /// API: base/ConfigBase::DictFieldProxy::set_erase(int64_t)
        ///
        /// Removes a value from the set at the current location.  If the current value does not
        /// exist then nothing happens.  If it does exist, but is not a set, it will be replaced
        /// with an empty set.  Otherwise the given value will be removed from the set, if present.
        ///
        /// Inputs:
        /// - `value` -- The value to be set
        void set_erase(int64_t value) { set_erase_impl(scalar{value}); }

        /// API: base/ConfigBase::DictFieldProxy::emplace
        ///
        /// Emplaces a value at the current location.  As with assignment, this creates dicts as
        /// needed along the keys to reach the target.  The existing value (if present) is destroyed
        /// to make room for the new one.
        ///
        /// Inputs:
        /// - `args` -- Value to be emplaced at current location
        ///
        /// Outputs:
        /// - `T&` -- Returns a reference to the templated type
        template <
                typename T,
                typename... Args,
                typename = std::enable_if_t<
                        is_one_of<T, config::set, config::dict, int64_t, std::string>>>
        T& emplace(Args&&... args) {
            if constexpr (is_one_of<T, int64_t, std::string>)
                return get_dirty<scalar>().emplace<T>(std::forward<Args>(args)...);

            return get_dirty().emplace<T>(std::forward<Args>(args)...);
        }
    };

    /// Wrapper for the ConfigBase's root `data` field to provide data access.  Only provides a []
    /// that gets you into a DictFieldProxy.
    class DictFieldRoot {
        ConfigBase& _conf;
        DictFieldRoot(DictFieldRoot&&) = delete;
        DictFieldRoot(const DictFieldRoot&) = delete;
        DictFieldRoot& operator=(DictFieldRoot&&) = delete;
        DictFieldRoot& operator=(const DictFieldRoot&) = delete;

      public:
        DictFieldRoot(ConfigBase& b) : _conf{b} {}

        /// API: base/ConfigBase::DictFieldRoot::operator[]
        ///
        /// Access a dict element.  This returns a proxy object for accessing the value, but does
        /// *not* auto-vivify the path (unless/until you assign to it).
        ///
        /// Inputs:
        /// - `key` -- Access a dict element with this key
        ///
        /// Outputs:
        /// - `DictFieldProxy` -- Returns a proxy object for accessing the value
        DictFieldProxy operator[](std::string key) const& {
            return DictFieldProxy{_conf, std::move(key)};
        }
    };

  protected:
    /// API: base/ConfigBase::_merge
    ///
    /// Internal implementation of merge. This takes all of the messages pulled down from the server
    /// and does whatever is necessary to merge (or replace) the current values.
    ///
    /// Values are pairs of the message hash (as provided by the server) and the raw message body.
    ///
    /// After this call the caller should check `needs_push()` to see if the data on hand was
    /// updated and needs to be pushed to the server again (for example, because the data contained
    /// conflicts that required another update to resolve).
    ///
    /// Returns the number of the given config messages that were successfully parsed.
    ///
    /// Will throw on serious error (i.e. if neither the current nor any of the given configs are
    /// parseable).  This should not happen (the current config, at least, should always be
    /// re-parseable).
    ///
    /// Inputs:
    /// - `configs` -- vector of pairs containing the message hash and the raw message body
    ///
    /// Outputs:
    /// - vector of successfully parsed hashes.  Note that this does not mean the hash was recent or
    ///   that it changed the config, merely that the returned hash was properly parsed and
    ///   processed as a config message, even if it was too old to be useful (or was already known
    ///   to be included).  The hashes will be in the same order as in the input vector.
    std::vector<std::string> _merge(
            const std::vector<std::pair<std::string, std::span<const unsigned char>>>& configs);

    /// API: base/ConfigBase::extra_data
    ///
    /// Called when dumping to obtain any extra data that a subclass needs to store to reconstitute
    /// the object.  The base implementation does nothing (i.e. extra data will be an empty dict).
    /// The counterpart to this, `load_extra_data()`, is called when loading from a dump that has
    /// extra data; a subclass should either override both (if it needs to serialize extra data) or
    /// neither (if it needs no extra data).  Internally this extra data is stored in the "+" key of
    /// the dump.
    ///
    /// Note that loading extra properly requires two-step construction: the subclass constructor
    /// must construct the ConfigBase object without extra data, and then call `init_from_dump()`
    /// from within its own constructor to load the dump.  Failing to do this two-step
    /// initialization will result in the subclass load_extra_data not being called (because the
    /// subclass instance, and thus the overridden method, does not yet exist during the ConfigBase
    /// constructor).
    ///
    /// Inputs:
    /// - `extra` -- An empty dict producer into which extra data can be added.
    virtual void extra_data(oxenc::bt_dict_producer&&) const {}

    /// API: base/ConfigBase::load_extra_data
    ///
    /// Called when constructing from a dump with the extra data dict.  The base implementation does
    /// nothing.  See extra_data() for a description.
    ///
    /// Inputs:
    /// - `extra` -- bt_dict_consumer over the extra data subdict.
    virtual void load_extra_data(oxenc::bt_dict_consumer&&) {}

    /// API: base/ConfigBase::load_key
    ///
    /// Called to load an ed25519 key for encryption; this is meant for use by single-ownership
    /// config types, like UserProfile, but not shared config types (closed groups).
    ///
    /// Takes a binary string which is either the 32-byte seed, or 64-byte libsodium secret (which
    /// is just the seed and pubkey concatenated together), and then calls `key(...)` with the seed.
    /// Throws std::invalid_argument if given something that doesn't match the required input.
    ///
    /// Inputs:
    /// - `ed25519_secret_key` -- key is loaded for encryption
    void load_key(std::span<const unsigned char> ed25519_secretkey);

  public:
    virtual ~ConfigBase() = default;

    // Object is non-movable and non-copyable; you need to hold it in a smart pointer if it needs to
    // be managed.
    ConfigBase(ConfigBase&&) = delete;
    ConfigBase(const ConfigBase&) = delete;
    ConfigBase& operator=(ConfigBase&&) = delete;
    ConfigBase& operator=(const ConfigBase&) = delete;

    // Proxy class providing read and write access to the contained config data.
    const DictFieldRoot data{*this};

    /// API: base/ConfigBase::storage_namespace
    ///
    /// Accesses the storage namespace where this config type is to be stored/loaded from.  See
    /// namespaces.hpp for the underlying integer values.
    ///
    /// Inputs: None
    ///
    /// Outputs:
    /// - `Namespace` -- Returns the namespace where config type is stored/loaded
    virtual Namespace storage_namespace() const = 0;

    /// API: base/ConfigBase::encryption_domain
    ///
    /// Subclasses must override this to return a constant string that is unique per config type;
    /// this value is used for domain separation in encryption.  The string length must be between 1
    /// and 24 characters; use the class name (e.g. "UserProfile") unless you have something better
    /// to use.  This is rarely needed externally; it is public merely for testing purposes.
    ///
    /// Inputs: None
    ///
    /// Outputs:
    /// - `Namespace` -- Returns the namespace where config type is stored/loaded
    virtual const char* encryption_domain() const = 0;

    /// API: base/ConfigBase::compression_level
    ///
    /// The zstd compression level to use for this type.  Subclasses can override this if they have
    /// some particular special compression level, or to disable compression entirely (by returning
    /// std::nullopt).  The default is zstd level 1.
    ///
    /// Inputs: None
    ///
    /// Outputs:
    /// - `std::optional<int>` -- Returns the compression level
    virtual std::optional<int> compression_level() const { return 1; }

    /// API: base/ConfigBase::config_lags
    ///
    /// How many config lags should be used for this object; default to 5.  Implementing subclasses
    /// can override to return a different constant if desired.  More lags require more "diff"
    /// storage in the config messages, but also allow for a higher tolerance of simultaneous
    /// message conflicts.
    ///
    /// Inputs: None
    ///
    /// Outputs:
    /// - `int` -- Returns how many config lags
    virtual int config_lags() const { return 5; }

    /// API: base/ConfigBase::merge
    ///
    /// This takes all of the messages pulled down from the server and does whatever is necessary to
    /// merge (or replace) the current values.
    ///
    /// Values are pairs of the message hash (as provided by the server) and the raw message body.
    ///
    /// For backwards compatibility, for certain message types (ones that have a
    /// `accepts_protobuf()` override returning true) optional protobuf unwrapping of the incoming
    /// message is performed; if successful then the unwrapped raw value is used; if the protobuf
    /// unwrapping fails, the value is used directly as a raw value.
    ///
    /// After this call the caller should check `needs_push()` to see if the data on hand was
    /// updated and needs to be pushed to the server again (for example, because the data contained
    /// conflicts that required another update to resolve).
    ///
    /// Returns the number of the given config messages that were successfully parsed.
    ///
    /// Will throw on serious error (i.e. if neither the current nor any of the given configs are
    /// parseable).  This should not happen (the current config, at least, should always be
    /// re-parseable).
    ///
    /// Declaration:
    /// ```cpp
    /// std::vector<std::string> merge(
    ///     const std::vector<std::pair<std::string, std::span<const unsigned char>>>& configs);
    /// std::vector<std::string> merge(
    ///     const std::vector<std::pair<std::string, std::vector<unsigned char>>>& configs);
    /// ```
    ///
    /// Inputs:
    /// - `configs` -- vector of pairs containing the message hash and the raw message body (or
    ///   protobuf-wrapped raw message for certain config types).
    ///
    /// Outputs:
    /// - vector of successfully parsed hashes.  Note that this does not mean the hash was recent or
    ///   that it changed the config, merely that the returned hash was properly parsed and
    ///   processed as a config message, even if it was too old to be useful (or was already known
    ///   to be included).  The hashes will be in the same order as in the input vector.
    std::vector<std::string> merge(
            const std::vector<std::pair<std::string, std::vector<unsigned char>>>& configs);

    // Same as above, but takes values as std::span<const unsigned char>s (because sometimes that is
    // more convenient).
    std::vector<std::string> merge(
            const std::vector<std::pair<std::string, std::span<const unsigned char>>>& configs);

    /// API: base/ConfigBase::is_dirty
    ///
    /// Returns true if we are currently dirty (i.e. have made changes that haven't been serialized
    /// yet).
    ///
    /// Inputs: None
    ///
    /// Outputs:
    /// - `bool` -- Returns true if changes haven't been serialized
    bool is_dirty() const { return _state == ConfigState::Dirty; }

    /// API: base/ConfigBase::is_clean
    ///
    /// Returns true if we are currently clean (i.e. our current config is stored on the server and
    /// unmodified).
    ///
    /// Inputs: None
    ///
    /// Outputs:
    /// - `bool` -- Returns true if changes have been serialized
    bool is_clean() const { return _state == ConfigState::Clean; }

    /// API: base/ConfigBase::current_state_string()
    ///
    /// Returns one of "clean", "pending", or "DIRTY" depending on the current state.  This is
    /// primarily intended for logging.
    ///
    /// Inputs: None
    ///
    /// Outputs:
    /// - `std::string_view` -- fixed string (clean, DIRTY, or pending) describing the current
    ///   state.
    std::string_view current_state_string() const {
        switch (_state) {
            case ConfigState::Clean: return "clean";
            case ConfigState::Dirty: return "DIRTY";
            case ConfigState::Waiting: return "pending";
        }
        assert(!"invalid state value!");
        return "<invalid-state>";
    }

    /// API: base/ConfigBase::is_readonly
    ///
    /// Returns true if this config object is in read-only mode: specifically that means that this
    /// config object can only absorb new config entries but is incapable of producing new entries,
    /// and thus cannot modify or merge configs.
    ///
    /// This currently happens for config messages that require verification of a signature but do
    /// not have the private keys required to *produce* a signature.  For private config types, such
    /// as single-user configs, this will never be the case (as those can only be decrypted in the
    /// first place if you possess the private key).  Note, however, that additional conditions for
    /// read-only could be added in the future, so this being true should not *strictly* be
    /// interpreted as a cannot-sign issue.
    ///
    /// There are some consequences of being readonly:
    ///
    /// - any attempt to modify config values will throw an exception.
    /// - when multiple conflicting config objects are loaded only the "best" (i.e. higher seqno,
    ///   with ties determined by hashed value) config is loaded; if values need to be merged this
    ///   config will ignore the alternate values until someone who can produce a signature produces
    ///   a merged config that properly incorporates (and signs) the updated config.
    /// - read-only configurations never have anything to push, that is, `needs_push()` will always
    ///   be false.
    /// - it is still possible to `push()` a config anyway, but this only returns the current config
    ///   and signature of the message currently being used, and *never* returns any obsolete
    ///   hashes.  Typically this is unlikely to be useful, as it is expected that only signers (who
    ///   can update and merge) are likely also the only ones who can actually push new configs to
    ///   the swarm.
    /// - read-only configurations do not reliably track obsolete hashes as the obsolescence logic
    ///   depends on the results of merging, which read-only configs do not support.  (If you do
    ///   call `push()`, you'll always just get back an empty list of obsolete hashes).
    ///
    /// Inputs: None
    ///
    /// Outputs:
    /// - `bool` true if this config object is read-only
    bool is_readonly() const { return _config->verifier && !_config->signer; }

    /// API: base/ConfigBase::current_hashes
    ///
    /// The current config hash(es); this can be empty if the current hash is unknown or the current
    /// state is not clean (i.e. a push is needed or pending).
    ///
    /// Inputs: None
    ///
    /// Outputs:
    /// - `std::vector<std::string>` -- Returns current config hashes
    std::vector<std::string> current_hashes() const;

    /// API: base/ConfigBase::old_hashes
    ///
    /// The old config hash(es); this can be empty if there are no old hashes or if the config is in
    /// a dirty state (in which case these should be retrieved via the `push` function). Calling
    /// this function or the `push` function will clear the stored old_hashes.
    ///
    /// Inputs: None
    ///
    /// Outputs:
    /// - `std::vector<std::string>` -- Returns old config hashes
    std::vector<std::string> old_hashes();

    /// API: base/ConfigBase::needs_push
    ///
    /// Returns true if this object contains updated data that has not yet been confirmed stored on
    /// the server.  This will be true whenever `is_clean()` is false: that is, if we are currently
    /// "dirty" (i.e.  have changes that haven't been pushed) or are still awaiting confirmation of
    /// storage of the most recent serialized push data.
    ///
    /// Inputs: None
    ///
    /// Outputs:
    /// - `bool` -- Returns true if the object needs pushing
    virtual bool needs_push() const;

    /// API: base/ConfigBase::push
    ///
    /// Returns a tuple of three elements:
    /// - the seqno value of the data
    /// - the data message to push to the server
    /// - a list of known message hashes that are obsoleted by this push.
    ///
    /// Additionally, if the internal state is currently dirty (i.e. there are unpushed changes),
    /// the internal state will be marked as awaiting-confirmation.  Any further data changes made
    /// after this call will re-dirty the data (incrementing seqno and requiring another push).
    ///
    /// The client is expected to send a sequence request to the server that stores the message and
    /// deletes the hashes (if any).  It is strongly recommended to use a sequence rather than a
    /// batch so that the deletions won't happen if the store fails for some reason.
    ///
    /// Upon successful completion of the store+deletion requests the client should call
    /// `confirm_pushed` with the seqno value to confirm that the message has been stored.
    ///
    /// Subclasses that need to perform pre-push tasks (such as pruning stale data) can override
    /// this to prune and then call the base method to perform the actual push generation.
    ///
    /// Inputs: None
    ///
    /// Outputs:
    /// - `std::tuple<seqno_t, std::vector<unsigned char>, std::vector<std::string>>` - Returns a
    /// tuple containing
    ///   - `seqno_t` -- sequence number
    ///   - `std::vector<unsigned char>` -- data message to push to the server
    ///   - `std::vector<std::string>` -- list of known message hashes
    virtual std::tuple<seqno_t, std::vector<unsigned char>, std::vector<std::string>> push();

    /// API: base/ConfigBase::confirm_pushed
    ///
    /// Should be called after the push is confirmed stored on the storage server swarm to let the
    /// object know the config message has been stored and, ideally, that the obsolete messages
    /// returned by `push()` are deleted.  Once this is called `needs_push` will start returning
    /// false until something changes.  Takes the seqno that was pushed so that the object can
    /// ensure that the latest version was pushed (i.e. in case there have been other changes since
    /// the `push()` call that returned this seqno).
    ///
    /// Ideally the caller should have both stored the returned message and deleted the given
    /// messages.  The deletion step isn't critical (it is just cleanup) and callers should call
    /// this as long as the store succeeded even if there were errors in the deletions.
    ///
    /// It is safe to call this multiple times with the same seqno value, and with out-of-order
    /// seqnos (e.g. calling with seqno 122 after having called with 123; the duplicates and earlier
    /// ones will just be ignored).
    ///
    /// Inputs:
    /// - `seqno` -- sequence number that was pushed
    /// - `msg_hash` -- message hash that was pushed
    virtual void confirm_pushed(seqno_t seqno, std::string msg_hash);

    /// API: base/ConfigBase::dump
    ///
    /// Returns a dump of the current state for storage in the database; this value would get passed
    /// into the constructor to reconstitute the object (including the push/not pushed status). This
    /// method is *not* virtual: if subclasses need to store extra data they should set it in the
    /// `subclass_data` field.  Resets the `needs_dump()` flag to false.
    ///
    /// Inputs: None
    ///
    /// Outputs:
    /// - `std::vector<unsigned char>` -- Returns binary data of the state dump
    std::vector<unsigned char> dump();

    /// API: base/ConfigBase::make_dump
    ///
    /// Returns a dump of the current state; unlike `dump()` this does *not* update the internal
    /// needs_dump flag; it is mostly used internally (by `dump()`), but can also be called
    /// externally for debugging purposes.
    ///
    /// Inputs: None
    ///
    /// Outputs:
    /// - `std::vector<unsigned char>` -- Returns binary data of the state dump
    std::vector<unsigned char> make_dump() const;

    /// API: base/ConfigBase::needs_dump
    ///
    /// Returns true if something has changed since the last call to `dump()` that requires calling
    /// and saving the `dump()` data again.
    ///
    /// Inputs: None
    ///
    /// Outputs:
    /// - `bool` -- Returns true if something has changed since last call to dump
    virtual bool needs_dump() const { return _needs_dump; }

    /// API: base/ConfigBase::add_key
    ///
    /// Encryption key methods.  For classes that have a single, static key (such as user profile
    /// storage types) these methods typically don't need to be used: the subclass calls them
    /// automatically.
    ///
    /// Adds an encryption/decryption key, without removing existing keys.  They key must be exactly
    /// 32 bytes long.  The newly added key becomes the highest priority key (unless the
    /// `high_priority` argument is set to false' see below): it will be used for encryption of
    /// config pushes after the call, and will be tried first when decrypting, followed by keys
    /// present (if any) before this call.  If the given key is already present in the key list then
    /// this call moves it to the front of the list (if not already at the front).
    ///
    /// If the `high_priority` argument is specified and false, then the key is added to the *end*
    /// of the key list instead of the beginning: that is, it will not replace the current
    /// highest-priority key used for encryption, but will still be usable for decryption of new
    /// incoming messages (after trying keys present before the call).  If the key already exists
    /// then nothing happens with `high_priority=false` (in particular, it is *not* repositioned, in
    /// contrast to high_priority=true behaviour).
    ///
    /// Will throw a std::invalid_argument if the key is not 32 bytes.
    ///
    /// Inputs:
    /// - `std::span<const unsigned char> key` -- 32 byte binary key
    /// - `high_priority` -- Whether to add to front or back of key list. If true then key is added
    ///   to beginning and replace highest-priority key for encryption
    /// - `dirty_config` -- if true then mark the config as dirty (incrementing seqno and needing a
    ///   push) if the first key (i.e. the key used for encryption) is changed as a result of this
    ///   call.  Ignored if the config is not modifiable.
    void add_key(
            std::span<const unsigned char> key,
            bool high_priority = true,
            bool dirty_config = false);

    /// API: base/ConfigBase::clear_keys
    ///
    /// Clears all stored encryption/decryption keys.  This is typically immediately followed with
    /// one or more `add_key` call to replace existing keys.  Returns the number of keys removed.
    ///
    /// Inputs:
    /// - `dirty_config` -- if this removes a key then mark the config as dirty (incrementing seqno
    ///   and requiring a push).  Only has an effect if the config is modifiable.
    ///
    /// Outputs:
    /// - `int` -- Returns number of keys removed
    int clear_keys(bool dirty_config = false);

    /// API: base/ConfigBase::remove_key
    ///
    /// Removes the given encryption/decryption key, if present.  Returns true if it was found and
    /// removed, false if it was not in the key list.
    ///
    /// The optional second argument removes the key only from position `from` or higher.  It is
    /// mainly for internal use and is usually omitted.
    ///
    /// Inputs:
    /// - `key` -- the key to remove from the key list
    /// - `from` -- optional agrument to specify which position to remove from, usually omitted
    /// - `dirty_config` -- if true, and the *first* key (the encryption key) is removed from the
    ///   list then mark the config as dirty (incrementing seqno and requiring a re-push).  Ignored
    ///   if the config is not modifiable.
    ///
    /// Outputs:
    /// - `bool` -- Returns true if found and removed
    bool remove_key(std::span<const unsigned char> key, size_t from = 0, bool dirty_config = false);

    /// API: base/ConfigBase::replace_keys
    ///
    /// Replaces the full set of keys with the given vector of keys.  This is equivalent to calling
    /// `clear_keys()` and then `add_key` with the keys, in order (and so the first key in the
    /// vector becomes the highest priority, i.e. the key used for encryption).
    ///
    /// Inputs:
    /// - `new_keys` -- the new decryption keys; the first key becomes the new encryption key
    /// - `dirty_config` -- if true then set the config status to dirty (incrementing seqno and
    ///   requiring a repush) if the old and new first key are not the same.  Ignored if the config
    ///   is not modifiable.
    void replace_keys(
            const std::vector<std::span<const unsigned char>>& new_keys, bool dirty_config = false);

    /// API: base/ConfigBase::get_keys
    ///
    /// Returns a vector of encryption keys, in priority order (i.e. element 0 is the encryption
    /// key, and the first decryption key).
    ///
    /// This method is mainly for debugging/diagnostics purposes; most config types have one single
    /// key (based on the secret key), and multi-keyed configs such as groups have their own methods
    /// for encryption/decryption that are already aware of the multiple keys.
    ///
    /// Inputs: None
    ///
    /// Outputs:
    /// - `std::vector<std::span<const unsigned char>>` -- Returns vector of encryption keys
    std::vector<std::span<const unsigned char>> get_keys() const;

    /// API: base/ConfigBase::key_count
    ///
    /// Returns the number of encryption keys.
    ///
    /// Inputs: None
    ///
    /// Outputs:
    /// - `int` -- Returns number of encryption keys
    int key_count() const;

    /// API: base/ConfigBase::has_key
    ///
    /// Returns true if the given key is already in the keys list.
    ///
    /// Inputs:
    /// - `key` -- will search if this key exists in the key list
    ///
    /// Outputs:
    /// - `bool` -- Returns true if it does exist
    bool has_key(std::span<const unsigned char> key) const;

    /// API: base/ConfigBase::key
    ///
    /// Accesses the key at position i (0 if omitted).  There must be at least one key, and i must
    /// be less than key_count().  The key at position 0 is used for encryption; for decryption all
    /// keys are tried in order, starting from position 0.
    ///
    /// Inputs:
    /// - `i` -- keys position in key list
    ///
    /// Outputs:
    /// - `std::span<const unsigned char>` -- binary data of the key
    std::span<const unsigned char> key(size_t i = 0) const {
        assert(i < _keys.size());
        return {_keys[i].data(), _keys[i].size()};
    }
};

// The C++ struct we hold opaquely inside the C internals struct.  This is designed so that any
// internals<T> has the same layout so that it doesn't matter whether we unbox to an
// internals<ConfigBase> or internals<SubType>.
template <
        typename ConfigT = ConfigBase,
        std::enable_if_t<std::is_base_of_v<ConfigBase, ConfigT>, int> = 0>
struct internals final {
    std::unique_ptr<ConfigBase> config;
    std::string error;

    /// Dereferencing falls through to the ConfigBase object
    ConfigT* operator->() {
        if constexpr (std::is_same_v<ConfigT, ConfigBase>)
            return config.get();
        else {
            auto* c = dynamic_cast<ConfigT*>(config.get());
            assert(c);
            return c;
        }
    }
    const ConfigT* operator->() const {
        if constexpr (std::is_same_v<ConfigT, ConfigBase>)
            return config.get();
        else {
            auto* c = dynamic_cast<ConfigT*>(config.get());
            assert(c);
            return c;
        }
    }
    ConfigT& operator*() { return *operator->(); }
    const ConfigT& operator*() const { return *operator->(); }
};

template <typename T = ConfigBase, std::enable_if_t<std::is_base_of_v<ConfigBase, T>, int> = 0>
inline internals<T>& unbox(config_object* conf) {
    return *static_cast<internals<T>*>(conf->internals);
}
template <typename T = ConfigBase, std::enable_if_t<std::is_base_of_v<ConfigBase, T>, int> = 0>
inline const internals<T>& unbox(const config_object* conf) {
    return *static_cast<const internals<T>*>(conf->internals);
}

template <size_t N>
void copy_c_str(char (&dest)[N], std::string_view src) {
    if (src.size() >= N)
        src.remove_suffix(src.size() - N - 1);
    std::memcpy(dest, src.data(), src.size());
    dest[src.size()] = 0;
}

// Wraps a labmda and, if an exception is thrown, sets an error message in the internals.error
// string and updates the last_error pointer in the outer (C) config_object struct to point at it.
//
// No return value: accepts void and pointer returns; pointer returns will become nullptr on error
template <std::invocable Call>
decltype(auto) wrap_exceptions(config_object* conf, Call&& f) {
    using Ret = std::invoke_result_t<Call>;

    try {
        conf->last_error = nullptr;
        return std::invoke(std::forward<Call>(f));
    } catch (const std::exception& e) {
        copy_c_str(conf->_error_buf, e.what());
        conf->last_error = conf->_error_buf;
    }
    if constexpr (std::is_pointer_v<Ret>)
        return static_cast<Ret>(nullptr);
    else
        static_assert(std::is_void_v<Ret>, "Don't know how to return an error value!");
}

// Same as above but accepts callbacks with value returns on errors: returns `f()` on success,
// `error_return` on exception
template <std::invocable Call, typename Ret>
Ret wrap_exceptions(config_object* conf, Call&& f, Ret error_return) {
    try {
        conf->last_error = nullptr;
        return std::invoke(std::forward<Call>(f));
    } catch (const std::exception& e) {
        copy_c_str(conf->_error_buf, e.what());
        conf->last_error = conf->_error_buf;
    }
    return error_return;
}

}  // namespace session::config
